Cobra Sport / 1.6 THP 155 & Racing (2010-15)
Citroen DS3 1.6 THP Sports Cat / De-Cat Downpipe Performance Exhaust
Part Number: CT12
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Citroen DS3 performance exhaust is made in 2.5"/63.5mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst.
The de-cat exhaust version is sold for motorsport and off road use only worldwide.
The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Cobra Sport were keen to develop a system for the DS3 which would match the fun and sporty feel of the car. The decision was made to manufacture the systems with 2.5" (62.5mm) mandrel bent T304 stainless steel pipework to allow for maximum gas flow and to deepen the exhaust tone. The completed exhaust systems create a much improved sound track on the DS3. During the 4,000 rpm static test the sound level of the resonated cat back system increased by 3.5db to register 78.4db on the sound meter. The non resonated system takes this a step further recording a more pronounced 86.5db an increase of 12db over the standard system.
Our development car was fully tested on the rolling road with the Cobra Sport cat back exhaust upgrade fitted. This testing revealed a 3.35% increase in horse power recording and impressive 154.3bhp. The testing also revealed excellent gains in torque with a 11.4% increase with the total figure jumping up to just over 200 lb-ft. Mass also reduced providing a weight saving of just over 0.5kg in comparison to its OE counterpart even with the largely increased pipework bore size. All in all these are certainly impressive results for this little car.
Styling options consist of standout 3" and 3.25" twin tailpipes in various styles including the new Blackout Ceramic tips. Available in these options are less obtrusive slash cut tailpipes which compliment the DS3's aesthetics nicely. All the exhaust variants are designed to remove the restrictive O/E first silencer which produces a more powerful sound track and overall, providing a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Matt Thomas, Sales Manager at Cobra Sport says "The cat back exhaust system has provided us with some exciting results especially in the torque gained from the 1.6 turbocharged engine. We've given the DS3 the sound that it deserved from the factory with the deeper more pronounced exhaust tone. For those looking for a further upgrade and more aggressive sound we are offering a sports cat or de-cat front pipe replacement to turn the DS3 into a great hot hatch."
This Citroen DS3 performance exhaust is made in 2.5"/63.5mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst.
The de-cat exhaust version is sold for motorsport and off road use only worldwide.
The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Cobra Sport were keen to develop a system for the DS3 which would match the fun and sporty feel of the car. The decision was made to manufacture the systems with 2.5" (62.5mm) mandrel bent T304 stainless steel pipework to allow for maximum gas flow and to deepen the exhaust tone. The completed exhaust systems create a much improved sound track on the DS3. During the 4,000 rpm static test the sound level of the resonated cat back system increased by 3.5db to register 78.4db on the sound meter. The non resonated system takes this a step further recording a more pronounced 86.5db an increase of 12db over the standard system.
Our development car was fully tested on the rolling road with the Cobra Sport cat back exhaust upgrade fitted. This testing revealed a 3.35% increase in horse power recording and impressive 154.3bhp. The testing also revealed excellent gains in torque with a 11.4% increase with the total figure jumping up to just over 200 lb-ft. Mass also reduced providing a weight saving of just over 0.5kg in comparison to its OE counterpart even with the largely increased pipework bore size. All in all these are certainly impressive results for this little car.
Styling options consist of standout 3" and 3.25" twin tailpipes in various styles including the new Blackout Ceramic tips. Available in these options are less obtrusive slash cut tailpipes which compliment the DS3's aesthetics nicely. All the exhaust variants are designed to remove the restrictive O/E first silencer which produces a more powerful sound track and overall, providing a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Matt Thomas, Sales Manager at Cobra Sport says "The cat back exhaust system has provided us with some exciting results especially in the torque gained from the 1.6 turbocharged engine. We've given the DS3 the sound that it deserved from the factory with the deeper more pronounced exhaust tone. For those looking for a further upgrade and more aggressive sound we are offering a sports cat or de-cat front pipe replacement to turn the DS3 into a great hot hatch."
-
Lifetime Warranty
Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).
-
UK Manufactured
All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.