Cobra Sport / JCW (F56) 2014-18

Mini (Mk3) JCW (F56) Resonator Delete Performance Exhaust*

Part Number: MN45

Please check connection on your vehicle before purchase. Fitment to PPF models requires mandatory ECU reflash.

£223.74 Excl. VAT
£268.49 Incl. VAT
Description

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.

This Mini John Cooper Works F56 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section to the centre section.

This exhaust makes the system louder as it removes the standard resonator or PPF filter on later models and therefore, offers a significantly sportier exhaust note.

All relevant fittings and gaskets are supplied.

Fitment to PPF models will require basic engine tuning at time of fitment to cancel the EML light and is for motorsport and off road use only.

Resonator/PPF delete reversion kit available to allow easy re-fitment of O/E parts, please see related products.

*Standalone part - not compatible/needed for Cobra turbo back setup.


The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.

EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.

Press Release

As with all new models, the F56 LCI facelift Mini Cooper S and JCW editions are fitted with a PPF (petrol particulate filter), which limits the potential of that fantastic 2.0-litre engine, leading to a muted and slightly disappointing sound.

Cobra Sport's engineers have developed a solution in the form of their new PPF Delete. This high-quality, 3in (76.2mm) mandrel-bent pipe features TIG-welded hangers and removes a significant restriction in the exhaust system.

The main brief was to improve the sound and unleash the full potential of that straight-six engine. Following intensive development, Cobra Sport have delivered a product that truly awakens the sound of the Mini while also improving gas flow.

The exhaust now emits a deep and vibrant tone, especially evident under load, while under deceleration, there's now an audible burble, accompanied by pops and bangs. This simple, but effective upgrade completely changes the character of the car, giving it a more sporty and thrilling sound with a 9dB increase.

A direct replacement for the OEM part, the Cobra Sport PPF Delete is the most cost-effective way to improve the sound of the stock facelift Mini. A simple ECU reflash will be required at the time of fitting to prevent engine warning lights illuminating.

Like all Cobra Sport exhausts, this product utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers.

Sound Videos

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.

This Mini John Cooper Works F56 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section to the centre section.

This exhaust makes the system louder as it removes the standard resonator or PPF filter on later models and therefore, offers a significantly sportier exhaust note.

All relevant fittings and gaskets are supplied.

Fitment to PPF models will require basic engine tuning at time of fitment to cancel the EML light and is for motorsport and off road use only.

Resonator/PPF delete reversion kit available to allow easy re-fitment of O/E parts, please see related products.

*Standalone part - not compatible/needed for Cobra turbo back setup.


The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.

EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.

Promotional Video

  • Lifetime Warranty

    Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).

  • UK Manufactured

    All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.

Subscribe now to get updates on our latest product releases