Cobra Sport / MK3 Cupra 280 2.0T (14-18)
Seat Leon Cupra 280/290/300 (14-18) (Pre-GPF) Cat Back Performance Exhaust
Part Number: SE53TP23LR
Tailpipes - 5.5" (139.7mm) x 3" (76.2mm) oval angled (TP23LR).
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Seat Leon Cupra 280, 290 and 300 performance exhaust is made in 3"/76.2mm pipework and fits pre-GPF models only from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections.
The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Delivering an even harder performance edge to Seat's brilliant Cupra 280 is the new Cobra Sport performance exhaust.
Cobra Sport's Sales Manager, Matt Thomas says, "The Cupra 280 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is already a totally involving driving experience on both road and track. We have now matched amazing performance with awesome styling and sound."
The results achieved with the Cupra 280 speak for themselves; anyone who is seriously interested in increasing the power output of their Cupra 280 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The Cobra Sport resonated cat back sound quality is pitch perfect and was tested at 86.5dB, 6.1 dB louder than standard. Yet under load, part throttle or idle the volume seems only marginally higher than a standard exhaust.
Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Example of Seat Leon Cupra 280 Resonated Cat Back Exhaust
Example of Seat Leon Cupra 280 Non-Resonated Cat Back Exhaust
Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Seat Leon Cupra 280, 290 and 300 performance exhaust is made in 3"/76.2mm pipework and fits pre-GPF models only from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections.
The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Delivering an even harder performance edge to Seat's brilliant Cupra 280 is the new Cobra Sport performance exhaust.
Cobra Sport's Sales Manager, Matt Thomas says, "The Cupra 280 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is already a totally involving driving experience on both road and track. We have now matched amazing performance with awesome styling and sound."
The results achieved with the Cupra 280 speak for themselves; anyone who is seriously interested in increasing the power output of their Cupra 280 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The Cobra Sport resonated cat back sound quality is pitch perfect and was tested at 86.5dB, 6.1 dB louder than standard. Yet under load, part throttle or idle the volume seems only marginally higher than a standard exhaust.
Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Example of Seat Leon Cupra 280 Resonated Cat Back Exhaust
Example of Seat Leon Cupra 280 Non-Resonated Cat Back Exhaust
Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
-
Lifetime Warranty
Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).
-
UK Manufactured
All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.