Cobra Sport / GTI 1.6T (2012-15)
Peugeot 208 GTi 1.6T Cat Back Performance Exhaust
Part Number: PG14YTP18
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Peugeot 208 GTI performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections.
The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
Please note: Also fits 2014-2015 30th Anniversary and 2015-2018 by Peugeot Sport models.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Cobra Sport were keen to develop a system for the 208 GTi which would match the fun and sporty feel of the car. The decision was made to manufacture the systems with 2.5" (62.5mm) mandrel bent T304 stainless steel pipework to allow for maximum gas flow and to deepen the exhaust tone. The completed exhaust systems create a much improved sound track on the 208 GTi. During the 4,000 rpm static test the sound level of the resonated cat back system increased by 3.5db to register 78.4db on the sound meter.
The non resonated system takes this a step further recording a more pronounced 82.5db an increase of 8db over the standard system. Our development car was fully tested on the rolling road with the Cobra Sport cat back exhaust upgrade fitted. This testing revealed a 3.35% increase in horse power recording and impressive 154.3bhp.
The testing also revealed excellent gains in torque with a 11.4% increase with the total figure jumping up to just over 200 lb-ft. Mass also reduced providing a weight saving of just over 0.5kg in comparison to its OE counterpart even with the largely increased pipework bore size. All in all these are certainly impressive results for this little car. Styling options consist of standout 3" twin unobtrusive slash cut tailpipes which compliment the GTI's aesthetics nicely. All the exhaust variants are designed to remove the restrictive O/E first silencer which produces a more powerful sound track and overall, providing a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability.
Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Matt Thomas, Sales Manager at Cobra Sport says "The cat back exhaust system has provided us with some exciting results especially in the torque gained from the 1.6 turbocharged engine. We've given the GTI the sound that it deserved from the factory with the deeper more pronounced exhaust tone. For those looking for a further upgrade and more aggressive sound we are offering a sports cat or de-cat front pipe replacement to turn the 208 GTI into a great hot hatch."
Example of the Cobra Sport Peugeot 208 GTi Exhaust (Non-Resonated Cat Back)
Example of the Cobra Sport Peugeot 208 GTi Exhaust (Non-Resonated Cat Back)
This Peugeot 208 GTI performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections.
The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
Please note: Also fits 2014-2015 30th Anniversary and 2015-2018 by Peugeot Sport models.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
Cobra Sport were keen to develop a system for the 208 GTi which would match the fun and sporty feel of the car. The decision was made to manufacture the systems with 2.5" (62.5mm) mandrel bent T304 stainless steel pipework to allow for maximum gas flow and to deepen the exhaust tone. The completed exhaust systems create a much improved sound track on the 208 GTi. During the 4,000 rpm static test the sound level of the resonated cat back system increased by 3.5db to register 78.4db on the sound meter.
The non resonated system takes this a step further recording a more pronounced 82.5db an increase of 8db over the standard system. Our development car was fully tested on the rolling road with the Cobra Sport cat back exhaust upgrade fitted. This testing revealed a 3.35% increase in horse power recording and impressive 154.3bhp.
The testing also revealed excellent gains in torque with a 11.4% increase with the total figure jumping up to just over 200 lb-ft. Mass also reduced providing a weight saving of just over 0.5kg in comparison to its OE counterpart even with the largely increased pipework bore size. All in all these are certainly impressive results for this little car. Styling options consist of standout 3" twin unobtrusive slash cut tailpipes which compliment the GTI's aesthetics nicely. All the exhaust variants are designed to remove the restrictive O/E first silencer which produces a more powerful sound track and overall, providing a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability.
Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish.
Matt Thomas, Sales Manager at Cobra Sport says "The cat back exhaust system has provided us with some exciting results especially in the torque gained from the 1.6 turbocharged engine. We've given the GTI the sound that it deserved from the factory with the deeper more pronounced exhaust tone. For those looking for a further upgrade and more aggressive sound we are offering a sports cat or de-cat front pipe replacement to turn the 208 GTI into a great hot hatch."
Example of the Cobra Sport Peugeot 208 GTi Exhaust (Non-Resonated Cat Back)
Example of the Cobra Sport Peugeot 208 GTi Exhaust (Non-Resonated Cat Back)
-
Lifetime Warranty
Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).
-
UK Manufactured
All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.