Cobra Sport / TTS (Mk3) Quattro 2015>
Audi TTS (Mk3) 2.0 TFSI Cat Back Performance Exhaust
Part Number: AU77TP81
Fits Coupe model only.
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Audi TTS (Mk3) performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back), these parts replace the centre and rear sections.
The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
Please Note - The 'Valved' performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swop from quieter to louder tones as before.
Please Note - The 'Non-Valved' performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind.
Fitted images show the non-valved resonated version.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
The new Cobra Sport systems for the Mk3 TTS offer the best of both worlds producing a deeper exhaust tone than standard which becomes highly aggressive when under full load whilst maintaining a sophisticated improvement in tonality for everyday use.
The Cobra Sport development team have produced both valved and non valved systems for the Mk3 Audi TTS. The valued systems are designed with the valve housing welded directly into the exhaust system allowing the use of the OE motors through the direct electrical connection. All systems are available with the active exhaust valves removed creating a more intense, constant sound and power upgrade.
The Cobra Sport team were able to reduce the weight of the exhaust by an impressive 39% over the OEM system with the resonated 3" non resonated cat back system weighing in at only 10.95kg compared to the original 17.95kg. The de-cat front pipe benefits from a 20% weight saving over standard weighing just 7.57kg.
Cobra Sport's Sales Manager, Matt Thomas, explains "The sound we have managed to achieve from the Mk3 TTS is in line with the marque's core values creating an unobtrusive and classy drive. The pitch perfect sound changes when under load increasing in volume and becoming more engaging with sound testing of the resonated cat back exhaust revealing a + 4dB increase on the 4,000 rpm test and + 9dB increase over the standard exhaust at idle. Those who require a more dynamic and aggressive exhaust tone can opt for the non-resonated turbo back system, which, with a de-cat, provides an all-round more involved and sportier upgrade whilst also opening up the opportunities for power gains for our tuning partners."
Cobra Sport brings two decades of innovative design and unparalleled manufacturing expertise and are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements that match the aspirations of the most demanding driver include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit.
Example of the Cobra Sport Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with resonated section).
Interior sound example - Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with resonated section).
Example of the Cobra Sport Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with louder non-resonated section).
Interior sound example - Audi TTS (Mk3) Quattro (cat back system with louder non-resonated section).
British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
Cobra Sport Exhausts VAG Promotional Video.
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Audi TTS (Mk3) performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back), these parts replace the centre and rear sections.
The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.
All relevant fittings and gaskets are supplied.
Please Note - The 'Valved' performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swop from quieter to louder tones as before.
Please Note - The 'Non-Valved' performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind.
Fitted images show the non-valved resonated version.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
The new Cobra Sport systems for the Mk3 TTS offer the best of both worlds producing a deeper exhaust tone than standard which becomes highly aggressive when under full load whilst maintaining a sophisticated improvement in tonality for everyday use.
The Cobra Sport development team have produced both valved and non valved systems for the Mk3 Audi TTS. The valued systems are designed with the valve housing welded directly into the exhaust system allowing the use of the OE motors through the direct electrical connection. All systems are available with the active exhaust valves removed creating a more intense, constant sound and power upgrade.
The Cobra Sport team were able to reduce the weight of the exhaust by an impressive 39% over the OEM system with the resonated 3" non resonated cat back system weighing in at only 10.95kg compared to the original 17.95kg. The de-cat front pipe benefits from a 20% weight saving over standard weighing just 7.57kg.
Cobra Sport's Sales Manager, Matt Thomas, explains "The sound we have managed to achieve from the Mk3 TTS is in line with the marque's core values creating an unobtrusive and classy drive. The pitch perfect sound changes when under load increasing in volume and becoming more engaging with sound testing of the resonated cat back exhaust revealing a + 4dB increase on the 4,000 rpm test and + 9dB increase over the standard exhaust at idle. Those who require a more dynamic and aggressive exhaust tone can opt for the non-resonated turbo back system, which, with a de-cat, provides an all-round more involved and sportier upgrade whilst also opening up the opportunities for power gains for our tuning partners."
Cobra Sport brings two decades of innovative design and unparalleled manufacturing expertise and are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements that match the aspirations of the most demanding driver include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit.
Example of the Cobra Sport Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with resonated section).
Interior sound example - Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with resonated section).
Example of the Cobra Sport Audi TTS (Mk3) Quattro Sports Exhaust (cat back system with louder non-resonated section).
Interior sound example - Audi TTS (Mk3) Quattro (cat back system with louder non-resonated section).
British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.
Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.
Cobra Sport Exhausts VAG Promotional Video.
-
Lifetime Warranty
Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).
-
UK Manufactured
All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.