Cobra Sport / Mk4 300 2.0T (KL1) (20>)
Cupra Leon 2.0 TSI 300 (20>) Back Box Delete Race Cat/GPF Back Performance Exhaust
Part Number: SE89
Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality.
This Cupra Leon (KL1 - 300 PS) performance exhaust is made in 3"/76.2mm pipework and fits from the Catalyst / GPF section (Gasoline-Particulate Filter) backwards (Cat/GPF-back) this exhausts replace the centre and rear sections.
This exhaust removes the rear silencer box for the ultimate improvement in terms of sound level whilst keeping the stock catalyst and GPF in place.
The non-resonated sports exhaust is sold for motorsport and off road use only.
The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is the most extreme Cat/GPF-Back upgrade. This louder option, as it excludes the centre silencer and therefore is loud.
GPF-Back (Non-Resonated Rear Box Delete) Cupra Mode Test Results:
Sound - Engine at Idle: 65dB (+7dB) - Static 3,800rpm test: 89.5dB (+11.5dB).
Weight - 12.07kg (-6.43kg)
GPF-Back (Resonated Rear Box Delete) Cupra Mode Test Results:
Sound - Engine at Idle: 63dB (+5dB) - Static 3,800rpm test: 86.3dB (+8.3dB).
Weight - 13.72kg (-4.78kg).
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
The latest Leon comes with an air of anticipation with owners keen to test the first CUPRA stand-alone hot hatchback.
CUPRA's all-new Leon 300 builds on two decades of successful SEAT performance cars, retaining the highly successful EA888 2.0 TSI engine and produces 300PS.
Whilst these healthy performance figures make the perfect recipe for the ultimate hot hatchback, the new CUPRA Leon is let down by its standard exhaust system, which is muted from the factory, limiting the character you'd expect from a performance car and resulting in a disappointing drive.
For those who want to enhance the sound of their CUPRA Leon 300, Cobra Sport has the solution with their performance exhaust range.
The CUPRA Leon (300) KL1 performance exhaust configurations are as follows:
Sports Cat/De-Cat Front Downpipes - To standard and Cobra Sport Cat/GPF-Back exhaust fitment. These performance exhausts significantly increases the flow of exhaust gases, with the sports cat option benefitting from a high flow 200-cell 4.5-inch catalyst.
Cat/GPF-Back - Pipework which attaches to the downpipe, replacing the centre and rear sections and featuring a rear silencer for those that want to introduce a sporty exhaust note. This system is optimised for non-GPF equipped cars and Leons equipped with the Cobra Sport's High Flow Sports Cat/De-Cat Front Downpipe.
Venom Back Box Delete Race Cat/GPF-Back - The most extreme upgrade that retains the factory catalyst and GPF for those that want to stand out from the crowd. This exhaust fits from the downpipe and routes all the way to the rear of the car, removing the rear silencer for the biggest increase in sound. The non-resonated performance exhaust option is very loud and the is sold for off-road and motorsport use only.
The 3,800rpm static sound testing revealed a +11.5dB increase when equipped with Cobra Sport's Non-Resonated Cat/GPF-Back performance exhaust system.
Like all Cobra Sport exhausts, these CUPRA Leon performance exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel-bent pipework has been developed in 3in (76.2mm) pipework, allowing for a smoother rate of gas flow for improved power delivery and a noticeably enhanced exhaust tone.
Static Sound Example - Non Resonated Race (Box Delete) GPF Back
Driving Sound Example - Non Resonated Race (Box Delete) GPF Back
Designed to demand attention, engineered to lead.
Developed on the track, released for the road.
This Cupra Leon (KL1 - 300 PS) performance exhaust is made in 3"/76.2mm pipework and fits from the Catalyst / GPF section (Gasoline-Particulate Filter) backwards (Cat/GPF-back) this exhausts replace the centre and rear sections.
This exhaust removes the rear silencer box for the ultimate improvement in terms of sound level whilst keeping the stock catalyst and GPF in place.
The non-resonated sports exhaust is sold for motorsport and off road use only.
The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is the most extreme Cat/GPF-Back upgrade. This louder option, as it excludes the centre silencer and therefore is loud.
GPF-Back (Non-Resonated Rear Box Delete) Cupra Mode Test Results:
Sound - Engine at Idle: 65dB (+7dB) - Static 3,800rpm test: 89.5dB (+11.5dB).
Weight - 12.07kg (-6.43kg)
GPF-Back (Resonated Rear Box Delete) Cupra Mode Test Results:
Sound - Engine at Idle: 63dB (+5dB) - Static 3,800rpm test: 86.3dB (+8.3dB).
Weight - 13.72kg (-4.78kg).
All relevant fittings and gaskets are supplied.
The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product.
EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.
Cobra Sport accepts no responsibility for the use of parts which remove emissions devices on the public highway. It is the customers responsibility to ensure that all local laws are adhered to within their home state/country.
The latest Leon comes with an air of anticipation with owners keen to test the first CUPRA stand-alone hot hatchback.
CUPRA's all-new Leon 300 builds on two decades of successful SEAT performance cars, retaining the highly successful EA888 2.0 TSI engine and produces 300PS.
Whilst these healthy performance figures make the perfect recipe for the ultimate hot hatchback, the new CUPRA Leon is let down by its standard exhaust system, which is muted from the factory, limiting the character you'd expect from a performance car and resulting in a disappointing drive.
For those who want to enhance the sound of their CUPRA Leon 300, Cobra Sport has the solution with their performance exhaust range.
The CUPRA Leon (300) KL1 performance exhaust configurations are as follows:
Sports Cat/De-Cat Front Downpipes - To standard and Cobra Sport Cat/GPF-Back exhaust fitment. These performance exhausts significantly increases the flow of exhaust gases, with the sports cat option benefitting from a high flow 200-cell 4.5-inch catalyst.
Cat/GPF-Back - Pipework which attaches to the downpipe, replacing the centre and rear sections and featuring a rear silencer for those that want to introduce a sporty exhaust note. This system is optimised for non-GPF equipped cars and Leons equipped with the Cobra Sport's High Flow Sports Cat/De-Cat Front Downpipe.
Venom Back Box Delete Race Cat/GPF-Back - The most extreme upgrade that retains the factory catalyst and GPF for those that want to stand out from the crowd. This exhaust fits from the downpipe and routes all the way to the rear of the car, removing the rear silencer for the biggest increase in sound. The non-resonated performance exhaust option is very loud and the is sold for off-road and motorsport use only.
The 3,800rpm static sound testing revealed a +11.5dB increase when equipped with Cobra Sport's Non-Resonated Cat/GPF-Back performance exhaust system.
Like all Cobra Sport exhausts, these CUPRA Leon performance exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel-bent pipework has been developed in 3in (76.2mm) pipework, allowing for a smoother rate of gas flow for improved power delivery and a noticeably enhanced exhaust tone.
Static Sound Example - Non Resonated Race (Box Delete) GPF Back
Driving Sound Example - Non Resonated Race (Box Delete) GPF Back
Designed to demand attention, engineered to lead.
Developed on the track, released for the road.
-
Lifetime Warranty
Cobra Sport exhaust systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind (terms apply).
-
UK Manufactured
All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish.